Gaskets, Packings & Seals Enterprises, LLC
P.O. Box 509,
Parkersburg, WV 26102
Contact Us | Home
Toll Free 1-866-458-7325
Ph 304-422-3880 Fx 304-422-9476
GP&S GASKETS


ASK OUR EXPERTS!
Whether you have a
simple question, problem application, or looking for a real solution for your bad actor equipment, contact our Application Specialists at
1-866-458-7325
for reliable assistance.

Gasket Materials - Compressed Non-Asbestos- NITRILE BINDER

To get a quote contact our
Application Specialists
at 1-866-458-7325
Thermoseal®/KLINGERSIL® C-4433

GP&S Enterprises, LLC proudly offers KLINGERSIL® C-4433 compressed non-asbestos gasket material.  C-4433 consists of fiberglass, aramid, and inorganic fibers with a nitrile binder.  This material is considered to be the ultimate, as well as offers outstanding load bearing capability.  C-4433 is excellent at resisting creep relaxation and is considered the best general purpose gasket material from Thermoseal.

 

 

 

                                  Liquids                                                                    Gases & Steam

Pressure & Temperature Graph
The pressure/temperature graphs shown are the most current method of determining the suitability of a gasket material in a known environment. Use the pressure and temperature graphs to select the most suitable material for your application.

 

1.

In area one, the gasket material is suitable using common installation practices subject to chemical compatibility.

 

2.

In area two, appropriate measures are necessary for installation of the gasket to ensure maximum performance. Please call or refer to the KLINGER® expert software system for assistance.

 

3.

In area three, do not install gaskets in these applications without first referring to the KLINGER® expert software system or contacting Thermoseal Inc.'s technical support service.

These graphs were developed from testing KLINGER® materials. Do not use them for competitors' materials since non-asbestos gasket materials do not have service equivalents.

Use: The limitations of use, as shown in the graphs, are for guidance only, and are based on 1/16" thick material. The limitations of use decrease significantly as gasket thickness increases. Do not use a thicker gasket material or "double gaskets" to solve a gasket problem without first consulting the manufacturer. The ability of a gasket material to make and maintain a seal depends not only on the quality of the gasket material, but also on medium being sealed, the flange design, the amount of pressure applied to the gasket by the bolts and how the gasket is assembled into the flanges and tightened.